PMTech Logo

+44 (0)1206 263 622

Miscellaneous

7 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Ersa BGA Rework System

    Ersa BGA Rework System

    £11,250.00

    Ersa PL/IR 550 BGA Rework System:

    Learn More
  2. Vision Engineering Mantis

    Vision Engineering Mantis

    £0.00

    Vision Engineering Mantis:

    We have 4 systems available

    Learn More
  3. Ex. Demo Hektor 2

    Ex. Demo Hektor 2

    £400.00

    Off-cut Remover Hektor 2: Hektor separates milled PCBs carefully and fast. The offcut material is removed smoothly and precisely. The matrix consists of two parts. This ensures easy and cost-saving change of the blades. Compressed air is used for the separation process. The operating pressure can be set on the machine. When the foot switch is pressed, the off-cut is punched out. The off-cuts are collected in the collecting box. When the gate is opened the waste material can be extracted.

    Separates milled PCBs carefully and fast.

    The PCB is slipped with its milled groove over the blade and is placed onto the matrix. The off-cut is pulled under the blade. When the foot switch is pressed, the off-cut is punched out and the waste material is collected inside the machine.

    Supplied with Footswitch and one L blade, size of your choice.

    Learn More
  4. AOI Systems SS1500

    AOI Systems SS1500

    £5,000.00

    AOI Systems SS1500-PAL:

    Used Benchtop AOI system

    • Can be used as a comparitor or Full AOI Inspection
    • Supplied with Manuals and software Dongle
    • YOM Circa 2012
    • Excellent, Fully working condition, hardly used
    Learn More
  5. PDR BGA Rework System

    PDR BGA Rework System

    £12,500.00

    PDR IR-XT5 IR BGA Rework System:

    Learn More
  6. Mirtec Benchtop Optical Inspection

    Mirtec Benchtop Optical Inspection

    £5,500.00

    Mirtec MV-2HTL Automatic Optical Inspection, Benchtop •Quick Set up •Supplied fully working & Tested •Hi Resolution 1.3 Mega Pixel Colour Camera •Max. Board Size 500mm x 400mm •Minimum Component Size 01005 •Dimensions 1130mm D x 970mm W x 472mm H •YOM 2005 •Supplied with Manuals and software discs Excellent Condition, Very low use Learn More
  7. /

    USED, PCB Separator MAESTRO 4S

    £2,500.00

    USED, MAESTRO 4S separates both small and large PCBs fast and economically. To optimize operation, the separation length can be programmed with the control keys.

    Strain of components: Frequently for critical components an upper limit of tensile stress will be determined. Please ask us regarding possibilities to reduce tensile stress of components.

    Safe Operation:

    Safe Operation with PCB separator

    The PCB is placed with its pre-scored groove onto the linear blade. When the foot switch is pressed, the blade carrier with the circular blade moves across the PCB, separating it into individual units. The clearance between the upper guide and the linear blade is adjustable to ensure that the PCB is only separated in the pre-scored groove. The table can be continuously adjusted with the rotary knob whenever required while the rest can be adjusted in three steps to the most suitable working position.


    Learn More

7 Item(s)

per page

Grid  List 

Set Descending Direction