Details
This high vacuum unit is designed to extract and filter fumes and debris through small bore hoses and attachments. Ideally suited for soldering iron tip extraction, vac pens and any application requiring close proximity, micro extraction.
Due to the high concentration of debris generated from up to 30 operators, this system has been designed to keep the unit compact, but still utilise a comprehensive filter system. With this in mind, the unit incorporate a facility for retaining a high concentration of particulate within the filter enclosure.
This system has a built in silencer, which has a collar to facilitate redirection or external venting of filtered air if required.
- Closed Loop Automatic Flow Control
- Small Footprint and Low Noise levels
- Reverse Flow
- 'Easi-Seal' Filter Location
T30A Technical Drawing
Components Diagram
-
1 Unit/Filter Condition Display - Automatic Closed Loop Flow Control
-
2 On/Off Switch
-
3 Signal / Interface Cable to Laser
-
4 Power Cable
-
5 Filter Housing Cam Latch
-
6 Door Hinges
-
7 Hose Inlet Connection
-
8 Exhaust Outlet
-
9 Motor Cooling Inlet
TECHNICAL DATA | ||
---|---|---|
Model | T30A | |
EC | ||
Dimensions (hxwxd) | 720 x 430 x 430mm | 29.5 x 17 x 17" |
Noise level (dBA)* | 66 | |
Blower | 1.1kw 200m3/hr | 118cfm |
Electronics | 230v 1ph 50/60Hz Full load current: 7.3 amps |
* At typical operating speed.
FILTER SPECIFICATION | |
---|---|
Pre Filter | |
Part Number | A1030093 |
Filter Media | Glass Fibre |
Filter Media Construction | Folded |
Housing | Cardboard |
FILTER SPECIFICATION | |
---|---|
Combined Filter | |
Part Number | A1030155 |
HEPA Filter Media Glass Fibre | Glass Fibre, Activated Carbon 9kg |
HEPA Media Construction | Maxi Pleat Construction with Webbing Spacers |
Filter Efficiency | H13 (99.997% @ 0.3 microns) |
Treated Activated Carbon | 15kgs |
Filter Housing | Zintec Mild Steel |
Airflow Through Filters
T30A Pre Filter
T30A Combined Filter
Additional Information
SKU | E2142A |
---|---|
Manufacturer | No |