Details
CAB Hektor 2:
Hektor separates milled PCBs carefully and fast. The offcut material is removed smoothly and precisely. The matrix consists of two parts. This ensures easy and cost-saving change of the blades. Compressed air is used for the separation process. The operating pressure can be set on the machine. When the foot switch is pressed, the off-cut is punched out. The off-cuts are collected in the collecting box. When the gate is opened the waste material can be extracted.
Off-cut Remover Hektor 2
Separates milled PCBs carefully and fast.
Safe Operation
The PCB is slipped with its milled groove over the blade and is placed onto the matrix. The off-cut is pulled under the blade. When the foot switch is pressed, the off-cut is punched out and the waste material is collected inside the machine.
Technical Data:
Separation type: Punch blade
PCB thickness: max. 2.5 mm
Air connection: 1/4"-plug-in coupler
Operating pressure: typical 4 bar
Storage/transport temperature: -20 - 50° C
Humidity, non-condensing: 10 - 85%
Safety regulations: CE, FCC class 1
Weight: 2.7 kg
Dimensions H x W x D: 170 x 220 x 255 mm
Additional Information
SKU | 8932145 |
---|---|
Manufacturer | No |